The JetSym software tool supports you from commissioning to servicing of motion systems.

Hardware Profile
A hardware profile is created quickly and conveniently. When selecting a JetMove drive, it is only necessary to enter a name and all relevant data are then automatically defined in the programming tool.

Oscilloscope
With the integrated multi-channel oscilloscope, axis behavior can be monitored right down to the individual bits. Several axis parameters can be monitored in real-time and visualized for diagnostic purposes. As a result, axis behavior can precisely be determined during a positioning run.

Motion Instructions
Whether a point-to-point motion is to be programmed or a trajectory with several axes is to be followed - the motion wizard assists you when entering commands. Pre-defined axis names are automatically prompted. Every instruction will concisely show you which functions are available at that point, while incorrect inputs are prohibited.

Motion Setup
All axis parameters can be accessed online with Motion Setup. The motion setup is structured so clearly that - intuitively - you will define the correct axis parameters. During commissioning it is important that the axis is moved safely and conveniently. For this reason the determined parameters are stored on the controller and the PC at the touch of a button. Then, the drive gets initialized by the controller using always the correct parameters, even when a servo amplifier has been replaced.

Diagnostics
Information on the current axis status is accessed at the click of a mouse button. All axis information - enabling, error signaling and the current axis status - is displayed immediately.